Freshly installed hardwood flooring beautifies any room. However, the process tends to get messy. Installing wood floors is a costly and challenging endeavor not many of us are willing to go through. On the other hand, sandless floor refinishing can give you a clean floor without any mess.

Let’s look at sandless floor refinishing, how it works, cost differences, how it fares against dustless flooring, and its pros and cons to gain better insight.

How It’s Done

Sandless floor refinishing is performed using abrasive pads or a liquid solution rather than a sander to remove any surface imperfections from the floor’s surface. There’s little to no dust produced during the entire process as the liquid solution will scrape away all of the floor’s debris.

As all the dust gets absorbed into the liquid, your furniture remains dust-free and spotless. The final stage of sandless floor refinishing details and rinses the floor. Later, a protective sealer is applied to give the floor a polished look.

If your hardwood floor has lost its shine, sandless floor refinishing can also quickly remove old paint or polish. However, this process is more of a touch-up than a substitute for conventional refinishing and sanding hardwood floors.

What’s more, it doesn’t remove your floor’s color. This means you can’t expect a color change after sandless floor refinishing. Also, this doesn’t remove any scratches, stains, or dents.

The whole process is a practical way to restore your floor to its original state as far as it’s only somewhat worn out.

Fashionable wood flooring

Wood floors accumulate dust and scratches over time, and some people prefer them that way. If you want to keep these imperfections, sandless floor refinishing brings the shine back to your floor without removing any scratches.

Sandless Or Dustless Refinishing, Which One’s Better?

More or less, dustless refinishing consists of the same process as conventional refinishing. The aim is to restore damaged and worn-out hardwood flooring to make it look as good as new.

First, the floors go through sanding until the surface turns raw. The sanding process needs to be done approximately three times until the desired results can be achieved. Second, the surface is stained with the color that you choose. Finally, coats are applied to finish and complete the process.

Hardwood floor with wall cabinets


Dustless refinishing is a modern way of sanding floors without leaving any speck of dust in the air. During this process, a special vacuum suction tube is used to direct the room’s dust into the machine. However, this process isn’t 100% dust-free.

On the other hand, sandless floor refinishing involves polishing the floor’s surface using a chemical before refinishing it with coats of stain. When comparing dustless to sandless refinishing, it’s important to realize that it doesn’t allow floor color changes.

What Are The Costs?

On average, refinishing floors costs around $3 to $8 per square foot, depending on what needs to be done and the method you’ll choose.  Accessibility, location, and floor condition affect the prices the most. Dustless hardwood floor refinishing runs around $5 to $8 per square foot.

Moreover, conventional refinishing methods cost around $3 to $6 per square foot, including sanding, recoating, moving the furniture, and cleaning up. Still, sandless refinishing is the most economical option costing lower than $1 per square foot mainly because it’s a lot less labor-intensive.

Newly installed hardwood floor


Are There Any Pros And Cons?

Considering the costs, sandless floor refinishing is half the price compared to conventional refinishing. Additionally, the procedure is more dust-free and clean. This refinishing option is great for hardwood flooring in a maintained state or has only just started to show signs of wear and tear.

Moreover, since this doesn’t remove any wood from the surface, it’s a safe way to treat older floorboards without decreasing their lifespan.

However, as with everything else, there are also some shortcomings for sandless floor refinishing. The first major downside is the fume that comes from the chemicals. So, rooms with poor ventilation are a challenge, and you might have to wear a protective mask during the process.

It also doesn’t remove any scratches or stains from your floor, leading to a less attractive finish than conventional sanding. If you’re willing to take on a sanding refinishing project, hire only the best flooring contractor in Seattle—Five Star Hardwood Floor! They have the expertise and equipment needed to ensure the job is done perfectly.